In order to get started with the program LINUX OPERATING SYSTEM, it is important to know how to use Linux . Below are certain steps you must follow. You are not going to be able to go on the system and always have a way to learn all of the steps. This section is going to take some time to explain the steps that are necessary in order to get yourself started
The first thing that you are going to do with this program is to download it and make sure that it is completely installed onto your computer. Then you can go through and make sure that everything is working in the proper manner. If you are not sure if you will like this system, you should be aware that you will be able to keep up with the current operating system that you have while also dedicating a part of the hard drive of your computer to Linux. With the help of Virtual Box, you could even run both of them at the same time to see how they work together side by side. You will then be able to learn how to use the program and decide if yoy like the setup and how it all works.
Many of the distributors of the Linux System are going to be able to provide you with a live CD so that you will be able to try out the product without it having to be downloaded on your computer. This is a great way to ensure that your hardware and all of the programs that you have on the computer are working well with this operating system before you have download it. This can be really great because some people are going to feel uncomfortable with having to install a second kind of operating system onto their computer.
With this live CD, you will be able to boot up the Linux system straight from the CD without having to add anything or download it to the computer. There are also some other distributions of the Linux system, such as Ubuntu, that are going to offer a CD or a DVD that is going to allow you to boot up this system, use it for a while to see how well it is going to work with your hardware and your computer, and then you will be able to install it straight from the disk without having to go through any other steps along the way.
Once you have gotten Linux updated and installed onto your computer, or you are using the CD, you should take the time to use some of the regular tasks that you would do on your normal operating system. These steps are going to be a little bit different for each person who is on the system based on what they use the computer for. Take a minute to think: what are some of the things that I do on the computer on a normal day? What are some of the tasks that I might not do every day but which I do often enough that it matters whether it is going to work or not. If you find that you are not able to do some solutions, such as burn a CD or work on a word processing program that you have on your computer, you should make a note of it. Try to be as detailed as you are able to and make notes as you go. When you are done, you should be able to determine all of the things that you want to do, or are able to do, and the things that you cannot do before you take the plunge with this Linux system. This is going to give you a good idea if the system is the right one for your needs and if you are going to still be able to get everything done or if there is going to be too much interference and difficulties.
When you are talking about the Linux distributions, it is more than likely going to refer to the GNU/Linux Distribution. This kind of distribution is a software collection that runs on top of the small program that is known as the Linux kernel. The kind of distribution that you will find in your program is going to determine the things that you are able to do and if the program is going to work with your computer.
This is a good thing to try out when you are first starting out on this system because it is going to allow you to still use your Windows platform while learning how to use the Linux system. One of the reasons that many are not going to switch over to the Linux program is because they are comfortable with their Windows program and are worried that they are going to mess things up if they do not like the Linux system or that they will not be able to get their Windows system back. The nice thing about Linux is that you are going to be able to run it right along with your Windows system. This is going to help you to learn how to partition the program while still using the system that you are used to. If you do not like the new system or you still want to be able to use your Windows system, it is possible to go back and forth between them the whole time that you are using the Linux system. It is important that you take time to back up all of the personal data and the settings that you have on your computer before you try to do a dual boot or else you might find that you are going to lose things in the process.
Once you have had time to experiment with the software on your system a little bit and figure out how to use it, if it is going to work well for your computer, and if you like it, it is time to start installing the software. You should get used to the installing and then the uninstalling software early on. This is important since understanding the management of the package and the repositories is one of the best ways that you are going to be able to understand the fundamentals of the Linux system. Once you are able to understand the system, it is a good idea to go through and install all of the software on your computer. If you are going to keep the old Windows software, this will be the last step that you need to do during the installing process. On the other hand, if you are going to get rid of the Windows system and just use Linux instead, you will be able to uninstall it once you have the Linux system fully updated and installed on your computer.
This system is known under several different names such as the shell, terminal window, or the terminal. This is one of the primary reasons that so many people are going to switch over to use Linux; the terminal is a great feature, so it is important to learn how to enjoy and use it so that you do not become intimidated. It is one of your best allies that does not include the same kinds of limitations that you are going to find on the Windows command prompt. If you do not think that you are going to use the interface, you will still be able to get a lot of benefits out of the Linux system just like you would on a MAC OSX. Using apropos is also able to help you find the command that does each specific task. For example, if you type in apropos user, you will be able to see a long list of commands that have the word of user in their description and you will be able to see all of the great options that are available in your system.
Once all of the software is uploaded on your computer, you should take the time that is needed in order to learn about and get familiar with your file system. The first thing that you might notice when you are using this system is that there is no longer the C: like what you would have seen in your Windows operating system. Everything in this system is going to start at the root of the file system and the different kinds of hard drives that you will get to are going to be accessed through the /dev directory instead. The home directory, which would be like the C:Documents and through the settings on Windows XP and Windows 200o, is going to be found in home with the Linux system.
There are many different things that you are going to be able to do with the Linux system and many of them you might not have realized when you were first getting started and looking it over. You can try out the encrypted partitions as well as the new and extremely fast file system, the redundant parallel disks that are going to be able to increase both the speed and the reliability of your system, and then you can try to install the Linux system to a bootable USB stick.
|Red Hat Certified Engineer||Linux Security Fundamentals|
|Linux Networking||Linux Administration|
|Linux Cluster||IBM LinuxONE|
Get Updates on Tech posts, Interview & Certification questions and training schedules