Blog

AnthillPro Interview Questions

  • (4.0)
  • | 876 Ratings |
  • Last Updated May 09, 2017

AnthillPro Interview Questions

If you're looking for AnthillPro Interview Questions & Answers for Experienced or Freshers, you are at right place. There are lot of opportunities from many reputed companies in the world. According to research AnthillPro has a market share of about 0.3%. So, You still have opportunity to move ahead in your career in AnthillPro Development. Mindmajix offers Advanced AnthillPro Interview Questions 2018 that helps you in cracking your interview & acquire dream career as AnthillPro Developer.

Enthusiastic about exploring the skill set of BootStrap? Then, have a look at the AnthillPro Training Course together additional knowledge.

Q: What is AnthillPro?
It is classified as a software tool which helps in build and release management phase within a project. With the use of AnthillPro, it completely automates the process of code building into projects and also verifies whether the project quality is maintained by testing it.

Q: How is AnthillPro is useful?
It is used as a software tool and helps the individuals to manage the following:
1. Build Management
2. Deployment Management
3. Dependency Management
4. Tool integration and data aggregation
5. Process Automation

Q: Explain about Codestation?
Usually, a complex project depends upon a number of sub-projects, sub-libraries and forms a complete project. It is the same case with a simple project, even a simple project uses multiple sub-libraries or more. So it is important for every individual to make sure all are taken care of and thus the software tool AnthillPro came up with a built-in dependency management functionality which is nothing but Codestation.

Q: So AnthillPro needs a third party dependency management system?
No, AnthillPro comes within an inbuilt dependency management system which is called as Codestation. The dependency management is actually done using the AnthillPro UI.

Q: What are the three types of projects in AnthillPro?
The three types of projects in AnthillPro are listed below:

1. Life cycle based projects
2. Codestation projects
3. Operational ( Nonlife cycle based) projects

Q: Define life cycle based projects?
A life cycle based project will give more clear information about the build and release cycle of a particular project. For example, a typical web application will have the UI layer, database, and the logic tier. Within AnthillPro all these three parts are executed and build using three projects. Thus every build has its own identification and has a unique set of an identifier. The following steps are taken into consideration for Lifecycle based projects:

1. Life cycle model
2. Environments
3. Build and workflow process

Q: Briefly, explain what is a job?
A job is nothing but a set of instructions or steps/process of getting something executed in an organized manner. This can be specific to build, deployment or it can be completely a business need.

Q: What is a trigger?
A trigger is defined as an automatic mechanism which ignites or starts a specific workflow. Usually, this is predefined so that it does it job when it needs to.

Q: Can a single workflow be used for multiple projects in Anthill Pro?
Well, a single workflow can be used for multiple projects. For this to happen, one has to make sure and use the same workflow process and use it for multiple projects by including them in the Workflow library.Usually, they are added at the point of the project workflow creation process.

Q: What is Source configuration?
A source configuration is very important in build and release cycle management system. Usually, it is useful to identify the source code for a particular project. Also, it helps the system to understand when it comes to retrieving a previous version of the project code. This is configured for every project at the time of the executing the source control.

Q: At what level, the dependencies within the projects are described in AnthillPro?
Usually, the dependencies within the projects are described at the workflow level in Anthill Pro.
 

Check Out AnthillPro Tutorials


Q: What does a life cycle model consist of?
A life cycle model consists of the following:
1. Cleanup Policy
2. Stamp style group
3. Artifact set
4. Status Group

Q: Within AnthillPro, can we use any third party plugins?
Yes, with the AnthillPro plugin system, one can write a customized code and can develop plugins which will help them to integrate with third-party tools.  For example, homegrown testing, CRM, analytics etc.

Q: What is the use of Job wizard in Anthill pro?
With the use of Anthill pro Job wizard, an individual will be able to successfully create the steps for the job to execute successfully. It will ensure that the build job will be configured successfully without any failures.

Q: What are the two different types of workflows in Anthill pro?
There are basically two types of workflows in Anthill Pro. i.e.

1. Origination workflow
2. Non-origination workflow

Q: What is Originating workflow in detail?
The originating workflows use life cycle models, build lives, source configurations and dependency information. Within this workflow, the user will have an option to opt for only one target environment.

Q: What is non-originating workflow in detail?
The non-originating workflows actually executed with the help of existing build life (i.e. deployments). The main difference between the origination workflow and non-originating workflow is that originating workflow will be able to select only environment, while non-originating workflows will have an option to select n number of target environments.

Q: What is workflow definition?
A workflow definition actually describes the sequence of the jobs that are configured to be executed. This sequence is configurable and this is nothing but workflow definition. It usually talks about the sequence or the order of the jobs that are aligned.

Q: Explain what exactly is defined in build life?
A build life actually talks about the three important aspects of the build or the deployment. They are as follows:

1. What has occurred during the build
2. What process was performed that has generated the artifacts
3. Where the build artifacts end up

Q: Within Anthill Pro, how deployments and releases are treated?
Most of the time deployments and releases are treated the same manner and usually follow the same process to test the Genuity. Most of the time it is handled by a secondary workflow which does the overnight checks. All this information is available for Build life page on Anthill Pro dashboard.

Q: hat are the different approaches for scheduling an independent method in Anthill Pro?
They are three different kinds of approaches for scheduling,
1. Independent scheduling
2. Push scheduling
3. Pull scheduling

Q: What is independent scheduling?
Within this type of approach, the related projects don't have to know each other in detail. A dependent project will be executed and it gathers all the dependencies from the source control and does the job.

Q: What is push scheduling?
A push scheduling is also known as a bottom-up model.
If the originating workflow is successfully built then the workflows associated with the process are automatically built as well. It is simply because any changes that are done to the dependency result in the changes to the dependent as well.

Q: What is pull scheduling?
This is completely opposite to that of push schedule.

In pull schedule, whenever a dependency build is executed then the dependents are not built automatically. This is a major difference. Also, the builds will be executed as per their own schedules.

Q: What is the clean up policy?
A clean policy defines the process when to delete a certain information from the old build lives and also all the other associated tasks within the project.

Q: What is stamp style group?
A stamp style group actually creates common names for the stamp types

Explore AnthillPro Sample Resumes! Download & Edit, Get Noticed by Top Employers!Download Now!


Q: State some of the status groups in Anthill pro?
A status group is nothing but a set of names for statues. Some of them are:
1. Failed
2. Successful
3. Deployed to Test
4. Deployed to production
5. Testing

Q: The majority of the projects within Anthillpro are life cycle based or not?
Yes, the majority of the projects that are set up under Anthillpro are life cycle based only.

Q: While build scheduling, dependency relationships are used?
Yes, dependency relationships are used while configuring build schedules.

Q: In AnthillPro can you lock down an artifact to a specific version?
Yes, an artifact can be locked down to a specific version within Anthill Pro.

 

 

Subscribe For Free Demo

Free Demo for Corporate & Online Trainings.